EU: Fuels: Automotive Diesel Fuel
Background
The quality of European diesel fuels is specified by the EN 590 standard. Even though these specifications are not mandatory, they are observed by all fuel suppliers in Europe. Beginning from the late 1990s, several diesel fuel properties—including cetane number, sulfur content and FAME biodiesel content—are also subject to environmental regulations.
Please log in to view the full version of this article | Subscription required.
While EN 590 is primarily focused on onroad applications, many European Member States specify the same fuel for use in nonroad mobile machinery but with the addition of a marker or dye for taxation purposes. Other member states have a separate standard for fuel for off-road mobile applications. An example of the later includes the UK that uses BS 2869 to define the specifications for fuel oils for a range of nonroad applications including nonroad mobile machinery.
Some of the important revisions of the EN 590 standard were:
- EN 590:1993—The first EU diesel fuel specification. It established a sulfur limit of 0.2% and a cetane number of 49 in onroad and nonroad diesel fuels. Sometimes referred to as Euro 1 diesel fuel.
- EN 590:1996—This standard reflected a new sulfur limit of 500 ppm. Cetane number remained at 49. Sometimes referred to as Euro 2 diesel fuel.
- EN 590:1999—This standard reflected the sulfur (350 ppm) and cetane number (51) specifications by Directive 98/70/EC (so called Euro 3 diesel).
- EN 590:2004—Sulfur limits of 50 ppm (so called Euro 4) and 10 ppm (Euro 5) as regulated by Directive 2003/17/EC. FAME content of 5%.
- EN 590:2009—FAME content of 7% as regulated by Directive 2009/30/EC. This directive also adopts mandatory biofuel requirements for refiners and introduces a 10 ppm S limit in nonroad fuels effective 2011.
Regulatory Terms. In the EU regulatory language, “gas oil” is the term used to describe a wide class of fuels, including diesel fuels for onroad vehicles, fuels for nonroad vehicles, as well as other distillate fuels. Within the gas oil classification, fuels for onroad vehicles (typically with sulfur content below 0.05%) are referred to as “diesel fuels”, while fuels for nonroad mobile machinery (typically with sulfur content up to 0.2%) are referred to as “gas oils intended for use by non-road mobile machinery (including inland waterway vessels), agricultural and forestry tractors, and recreational craft”.
These terms are also linked to the terminology used in the EU Common Customs Tariff. Different goods are assigned unique CN (Combined Nomenclature) codes to identify the tariffs that apply. Diesel fuel for onroad applications has a CN code of 2710 19 41. Gas oils for nonroad mobile machinery can have a CN code of either 2710 19 41 or 2710 19 45 depending on sulfur level.
EN 590:1993 Specification
The EN 590:1993 included a sulfur limit of 0.2% (wt.), which became effective from October 1994 [Directive 93/12/EEC]. This sulfur limit was applicable to all gas oils, including diesel fuel. Details on the EN 590:1993 specification are listed in Table 1.
Fuel Property | Unit | Specification | Test | |
---|---|---|---|---|
Min | Max | |||
Cetane Number | 49 | - | ISO 5165 | |
Cetane Index | 46 | - | ISO 4264 | |
Density @15°C | kg/m3 | 820 | 860 | ISO 3675/ASTM D4052 |
Sulfur | % (wt.) | - | 0.20 | EN 24260/ISO 8754 |
Flash Point | °C | 55 | - | ISO 2719 |
Carbon residue (10% btms) | % (wt.) | - | 0.30a | ISO 10370 |
Ash | % (wt.) | - | 0.01 | EN 26245 |
Water content | mg/kg | - | 200 | ASTM D1744 |
Copper strip corrosion, 3h @50°C | - | Class 1 | ISO 2160 | |
Oxidation stability | g/m3 | - | 25 | ASTM D2247 |
Viscosity @40°C | mm2/s | 2.00 | 4.50 | ISO 3104 |
Distillation (vol. % recovered) | °C | ISO 3405 | ||
10% point | report | |||
50% point | report | |||
65% point | 250 | - | ||
85% point | - | 350 | ||
95% point | - | 370 | ||
a - limit does not apply if ignition improver additives are used. |